95 Reasons to buy Fendt
|
95 Reasons FENDT Vario TMS Is Better |
|
| 1 | Uniquely designed Dana front axle built exclusively for FENDT |
|
2
|
Smoother ride with special FENDT design and built front axle suspension standard
|
|
3
|
Larger front axle planetary hub assembly
|
|
4
|
Minimal lubrication points on front axle
|
|
5
|
More strength – Heavy cast frame on 400/700/800 Series
|
|
6
|
The right connections – Conical machine holes in frame for superior loader/attachment hookup
|
|
7
|
FENDT designed front PTO
|
|
8
|
FENDT designed front 3-point hitch
|
|
9
|
Factory or field-installed front 3-point hitch and PTO
|
|
10
|
Cubical cooling system with pivoting coolers
|
|
11
|
The atomizer – 20,300 PSI injection pressure-400/700/800 provides superior atomization of fuel
|
|
12
|
Drinks less – Unmatched fuel efficiency on Deutz/MAN engines
|
|
13
|
Produces more – Tractor Management System interface maximizes fuel efficiency and productivity
|
|
14
|
Exclusive shuttle capability from left steering adjustment lever or joystick
|
|
15
|
Minimum and maximum RPM programmable in terminal screen
|
|
16
|
Minimum and maximum RPM buttons accessible in armrest
|
|
17
|
TMS button accessible in armrest
|
|
18
|
Everything at your fingertips – multi-function joystick
|
|
19
|
Hits the ground running – 0 to 50 kph (32mph) achieved on 800 series in record-setting 9.6 seconds
|
|
20
|
Footstep or joystick control activated from armrest control
|
|
21
|
Armrest sliding control sets maximum speed for foot pedal control (3-32mph)
|
|
22
|
Swaps control of spool valves from joystick to crossgate lever with a touch of a button
|
|
23
|
Electronic apportioning valves – Standard 4-position electronic valves regulate flow, timing, and priority
|
|
24
|
A Window to the future – The large, clear, nonreflective Vario color terminal screen comes standard
|
|
25
|
Terminal controls for the front 3-point hitch
|
|
26
|
Electrohydraulic power lift controls the front 3-point rate of height, rate of raise, and rate of drop
|
|
27
|
Terminal controls for the rear 3-point hitch
|
|
28
|
Rear 3-point hitch rate of height, rate of drop, position/draft control
|
|
29
|
Shock load stabilization with programmable cut in speed
|
|
30
|
Automatic function for front 3-point hitch raise/lower
|
|
31
|
Automatic function for rear 3-point hitch raise/lower
|
|
32
|
Automatic function of front PTO from joystick
|
|
33
|
Automatic function of rear PTO from joystick
|
|
34
|
Automatic function of front PTO/3-point hitch simultaneously
|
|
35
|
Automatic function of rear PTO/3-point hitch simultaneously
|
|
36
|
Unique FENDT cab suspension comes standard
|
|
37
|
Down force hydraulics on the front 3-point hitch
|
|
38
|
Down force hydraulics on the rear 3-point hitch
|
|
39
|
All spool valves can be locked from the right-hand console touchpad
|
|
40
|
Spool valves automatically lock up when tractor is shut off
|
|
41
|
4-wheel-drive and differential lock buttons accessible on right-hand console
|
|
42
|
Two cruise control speeds are programmable from terminal screen
|
|
43
|
Two shuttle speeds are programmable from terminal screen
|
|
44
|
Automatic maximum output control is programmable from terminal screen
|
|
45
|
Implement control ready comes standard with ISO 11783 plug
|
|
46
|
Unmatched precision. Fieldstar® ready. Comes standard with ISO 11783 plug
|
|
47
|
Hands-free steering. Auto-Guide™ ready
|
|
48
|
Standard onboard computer features include distance traveled, area coverage, time and external impulse counters
|
|
49
|
Easy on the eyes – Variotronic camera capability
|
|
50
|
Storage of up to four implement-specific tractor settings is standard
|
|
51
|
Quick Turnaround – Ti Headland Management System comes standard on TMS tractors- 16 sequences/13 functions stored for four implements- one button control
|
|
52
|
Picture perfect – On-screen picture format for headland management
|
|
53
|
Four-sequence triggers for Headland Management System
|
|
54
|
Capability to edit specific functions
|
|
55
|
Capability to save sequences for later date
|
|
56
|
Button selection preference for Ti sequences
|
|
57
|
Pause function for Ti Headland Management System
|
|
58
|
Specific triggers for specific functions
|
|
59
|
Copy and paste capability to other joystick buttons
|
|
60
|
Adjustable terminal screen brightness and contrast
|
|
61
|
Four rates of acceleration right on joystick
|
|
62
|
Smooth engagement. 540/540E and 1000 RPM PTO standard on all 700/800 series (110-160) PTO hp
|
|
63
|
Stops on a dime – Exclusive capability of exhaust, air or hydraulic trailer braking
|
|
64
|
Limp-home function capability if electronics fail on all Vario models
|
|
65
|
Special standard cold weather starting – coolant, transmission and hydraulic heaters incorporated in electrical bank
|
|
66
|
Tiltable cab feature- 400/700/800 Series
|
|
67
|
Rear washer and wiper standard
|
|
68
|
Total recall. Last function status used can be reactivated with the touch of a button on terminal screen
|
|
69
|
Remove FENDT factory loader by using simple front axle suspension and not tractor hydraulics
|
|
70
|
Fuel consumption values shown on terminal screen on 900 Series
|
|
71
|
Mounts in minutes. Capability of mounting factory or field-installed loader with front PTO and 3-point hitch installed
|
|
72
|
Can set flow and timing control in the raise and lower position of spool valve from terminal screen
|
|
73
|
Front 3-point hitch and/or PTO available on all Vario models
|
|
74
|
Rear heavy-duty drawbar available as standard with published static and dynamic load ratings as 40 and 50 kph
|
|
75
|
Emergency stop button on joystick for quickly deactivating both front and rear PTO’s
|
|
76
|
PTO Deactivation button on both rear LH and RH fenders
|
|
77
|
Reverse travel capability on all 900 TMS models from 160-240 PTO hp
|
|
78
|
3 year/3000 hour Customer Care plan on oil/filters/routine maintenance
|
|
79
|
78. 3 year/3000 hour no deductible warranty; no charge pickup and delivery within 75 miles of dealer service location
|
|
80
|
48-hour uptime service guarantee
|
|
81
|
Order from the menu. Operator can monitor all major tractor functions visually from the main menu screen on the go
|
|
82
|
Smart implements can be monitored and controlled from Vario terminal screen alleviating control box, needless cables and wiring harnesses
|
|
83
|
Vario terminal can operate implements setup for LBS+ and ISO 11783 protocol
|
|
84
|
In sync. With TMS button activated, engine speed and ground speed are synchronized when operating foot pedal
|
|
85
|
Always alert. Information/diagnostic capability through fault codes in LCD display can tell operator if there is a problem needing attention
|
|
86
|
Never forgets. Codes are cleared but history is retained in memory on the tractor
|
|
87
|
Rare rubber. Exclusive Michelin tires standard on all models of FENDT tractors
|
|
88
|
Improved Reaction Time – Special FENDT reactive steering system
|
|
89
|
Color terminal screen standard on all models from 110-270 PTO hp
|
|
90
|
Pressure-flow compensated hydraulics standard on all models 72-270 PTO hp
|
|
91
|
Electronically activated diverter valve capability on all FENDT field-installed loaders
|
|
92
|
Best seat in the house. Super comfort seat option with pneumatic lumbar support and heater
|
|
93
|
Separate compartment for CVT transmission and hydraulics to prevent contamination
|
|
94
|
Transmission designed as an insert to make serviceability (if needed) less costly for the operator
|
| 95 |
Breathes easier. Unique Strata aspiration system on 900 TMS tractors uses centrifugal force to preclean incoming air more efficiently in very dusty conditions |
